Microlife THERMO+ Instrukcja Użytkownika Pobierz pdf (Strona 4)

High Temperature Indication

10 short beeps and a red LCD backlight alert the patient

that he/she may have a temperature equal to or higher than

37.5 °C.

2. Important Safety Instructions

3. How this Thermometer measures Temper-

ature

This thermometer measures infrared energy radiated from

the skin above the eyebrow area and the surrounding

tissue. This energy is collected through the lens and

converted to a temperature value.

Temperature readings obtained by scanning above the

eyebrow area will provide the greatest accuracy.

4. Control Displays and Symbols

5. Directions for Use

• This instrument may only be used for the purposes

described in this booklet. The manufacturer cannot be

held liable for damage caused by incorrect application.

• Never immerse this instrument in water or other

liquids. For cleaning please follow the instruc-

tions in the «Cleaning and Disinfecting» section.

• Do not use the instrument if you think it is damaged or

notice anything unusual.

• Never open the instrument.

• This instrument comprises sensitive components and

must be treated with caution. Observe the storage and

operating conditions described in the «Technical Specifi-

cations» section.

• Protect it from:

− extreme temperatures

− impact and dropping

− contamination and dust

− direct sunlight

− heat and cold

• If the instrument is not going to be used for a prolonged

period the battery should be removed.

• Ensure that children do not use the instrument unsuper-

vised; some parts are small enough to be swallowed.



WARNING: Use of this instrument is not intended

as a substitute for consultation with your physician.

This instrument is NOT waterproof so do not

immerse in liquids.

• All segments displayed 6: Press the ON/OFF button

4 to turn on the unit; all segments will be shown for

2 seconds.

• Memory 7: The last reading will automatically be

shown on the display for 2 seconds.

• Ready for measurement 8: When the unit is ready for

measurement, the «°C» or «°F» icon will keep flashing.

• Measurement complete 9: The reading will be

shown on the display 3 with the «°C» or «°F» icon; the

unit is ready for the next measurement, when the «°C»

or «°F» icon is flashing again.

• Low battery indication AT: When the unit is turned on,

the battery icon will keep flashing to remind the user to

replace the battery.

1. Press the ON/OFF button 4. The display 3 is activated

to show all segments for 2 seconds.

The last measurement reading will be shown on the

display automatically for 2 seconds with the «

» icon

1 2 3 4 5 6 7 8 9 ... 27 28

Komentarze do niniejszej Instrukcji

Brak uwag

Microlife THERMO+ Instrukcja Użytkownika Strona 4

Komentarze do niniejszej Instrukcji